DLH & LH Bar Joist

LH and DLH joists are longspan bar joists designed for greater loads and are able to span longer distances than K series joists.LH joists depths range from 18 to 48 inches and reach spans between 21 and 96 feet. DLH joists are specifically designed for roof decks and are between 52 to 120 inches deep. This allows DLH joist to span 90 to over 200 feet. and share similar profile types and bearing conditions as LH joists.

Standard end bearing depths as as follows:

• LH Joist is 5 inches
• DLH Joist standard end bearing depth is 5 or 7.5 inches, depending on the chord section

Designations vs. Load/Load

Both standard designation and load/load specification methods are acceptable ways to communicate the required load-carrying capacity of steel joists because both provide the manufacturer with the necessary information to design and fabricate the joists. Neither method is inherently "better" than the other. The best method depends on the specific requirements of the project.

Designation

A standard designation is a shorthand way of specifying the load-carrying capacity of a steel joist. The designation consists of the joist depth, followed by a letter or letters denoting the joist series, and a section number which indicates the load criteria. For example, a **24K6** designation indicates a 24-inch deep K-series joist with a section number of 6. Using a standard designation simplifies specification and allows for easy cross-referencing with the SJI load tables.

Load/Load

The "load/load" specification is an alternative method for specifying joists. It is written in the following format:

DD[SERIES] TL // LL [Example: 28K 200 / 120]

• • DD= is the depth of the joist in inches,
  • SERIES = meaning K, LH or DLH
  • TL= is the total load in pounds per linear foot (PLF)
  • LL = is the live load in pounds per linear foot (PLF)

For instance, a **24K300/175** designation specifies a 24-inch K-series joist capable of carrying a total load of 300 plf and a live load of 175 plf. This approach allows for more precise specification of the load requirements for the joist, particularly when dealing with non-uniform loads or concentrated loads.

Special Geometry & Design

Bowstring, arch, scissor, double-pitched, single-pitched, and multi-pitched trusses, offer unique architectural aesthetics and functional advantages. However, their complexity requires careful consideration during design and fabrication, often leading to higher costs and transportation challenges. The fabrication of curved elements can be more complex and require specialized equipment.

	Joist Splices Bolted field splices are used in open web steel joists when there are shipping constraints, site accessibility issues, fabrication limitations or span requirements that might exceed what a single piece can be fabricated as.
	Pitched Trusses Single pitched, double or multi-pitched steel joists can add complexity and cost to fabrication.
	Bowstring Trusses Bowstring trusses, with their curved top chord and straight bottom chord
	Arch Trusses Arch trusses feature a curved shape, but their bottom chord is also curved, creating a graceful arch-like appearance.
	Scissor Trusses Scissor trusses get their name from their resemblance to a pair of scissors. They consist of two sloping top chords that meet at a central peak.

Joist Calculations

Joist calculations ensure that steel joists meet all structural performance and safety standards. We provide two types of calculations to support your project needs:

For Approval:

Approval calculations are mandatory before fabrication begins. These calculations require review and approval by the Engineer of Record (EOR) to confirm compliance with building codes and safety standards. Approval calculations typically include a full engineering analysis and a registered engineer’s seal, guaranteeing that the joist design meets all structural requirements.

For Record:

Record calculations are generally provided at no extra cost. These allow the project to move forward while awaiting full approval calculations. Record calculations support the fabrication process but do not require formal EOR approval before work begins, enabling a faster start while maintaining design integrity.

Certifications:

For open web steel bar joists, required certifications are generally specified in project documents, including specifications, drawings, and contracts. Certifications ensure compliance with structural and safety standards, and we are prepared to guide you through the submittal process with all necessary documentation for these certifications.

SJI Manufacturers:

Every open web steel joist that we supply is manufactured to exact specifications by Steel Joist Institute (SJI) members, which means that you can be assured of the highest quality product.

Made in America:

Our products are made with US made steel. When mill certificates are required, we can provide you the material's physical and chemical properties. Contact us for more information regarding mill certs for your project.